Gearbox BB 4,1:1 for AC 25/35, pinion wheel 3 mm dia

Gearbox for MP JET electromotors Classic AC 26/45, output shaft 4 mm dia is supported by two ball bearings. The packaging contains: gearbox, pinion wheel, Pan Head screws 2,9x13 and screws M3x10. Content of package: 1 pc

Complete Super Cool spinners with inner axial cooling channel for better electromotor cooling. Aluminium alloy rear part, middlepart hub and collet, steel propeller blade pins, plastic front tip. Available in three colours - black (code B), red (R), white (W). Content of package: 1 pc

By using this counter bearing shaft, the forces that are applied on the output shaft outer bearing will be reduced. The centering diameter 5 mm corresponds with the diameter in servo arm. Content of package: 2 sets

Collet for RDS system, hole for steel rod 3 mm dia, shaft OD 5,7 mm, 25 splines, 105°, total length 27 mm. For servo Hitec (5625MG, 525BB). Content of package: 2 pcs

Aluminium precise turned Cheesehead screw M5x16. Length of thread 16 mm, head dia 8,5 mm, width of slot for screwdriver 1,2 mm. Content of package: 4 pcs

The clevises with a special metal snap pin are suitable for all types of exact connections of pushrods and control horns. The end of the metal snap pin with the lock minimizes the risk of a spontaneous loosening of fatique due to vibration. Available in black and white colour. The package contains the snap pins 2 mm dia. Spare snap pins MPJ 2132 BR....

Short brass snap pins 2 mm dia for plastic clevises, l=30 mm (MPJ 2130-2135). Content of package: 10 pcs

The clevises with a special metal snap pin are suitable for all types of exact connections of pushrods and control horns. The end of the metal snap pin with the lock minimizes the risk of a spontaneous loosening by fatigue or because of vibrations. Available in black and white colour. The package contains the snap pins 1,6 mm dia. Spare snap pins MPJ 2112...