Welcome to our e-shop!
If you find any mistake (primarily translations), please inform us about that via our contact form. Please include the link or catalog number of the part where you found the mistake. Thank you.
MPJ 4148 AM
3D printed holder for tubes with an outer diameter of 6 mm, made of PETG material. The holder can be mounted by gluing (e.g. using CA glue) or using the pre-printed hole for a Pan Head screw diameter 2.2 mm (not included in the package, suitable screws can be found below in the related products). The tube then can be simply snapped into place.
Package...
MPJ 4147 AM
3D printed holder for tubes with an outer diameter of 5 mm, made of PETG material. The holder can be mounted by gluing (e.g. using CA glue) or using the pre-printed hole for a Pan Head screw diameter 2.2 mm (not included in the package, suitable screws can be found below in the related products). The tube then can be simply snapped into place.
Package...
MPJ 4146 AM
3D printed holder for tubes with an outer diameter of 4 mm, made of PETG material. The holder can be mounted by gluing (e.g. using CA glue) or using the pre-printed hole for a Pan Head screw diameter 2.2 mm (not included in the package, suitable screws can be found below in the related products). The tube then can be simply snapped into place.
Package...
MPJ 4190 AM
3D printed ball valve holder from PETG for ball valves for tubes with a diameter of 4 mm and 6 mm. The holder can be attached using four 2.2 mm screws (4 pcs. 2.2x9.5 mm included in the package). The ball valve is fixed with the help of 2.5 mm wide tightening straps (2 pcs included in the package) to the holder and is axially secured by the extended...
MPJ 96044
Replaceable Swann Morton sterile blades n.11 to be used with scalpel n.3 (MPJ 96042).
Package contains 6 sterile blades n.11.
MPJ 96042
Scalpel n.3 from stainless steel with replaceable blades.
Package contains 1 handle n.3 and 3 sterile blades n.11.
MPJ 96411
Sanding block for sanding su0rfaces and angles. Available in several widths and with different angles.
MPJ 96410
Sanding block for sanding surfaces and angles. Available in several widths and with different angles.
MPJ 96416
Sanding block for sanding surfaces and grooves. Available in several widths and with different angles.
MPJ 96415
Sanding block for sanding surfaces and grooves. Available in several widths and with different angles.
Popular Products
MPJ 96600
The painting jigis intended as a hand holder to facilitate the painting of miniatures (such as Warhammer figures, Gundam, etc.), models (such as railways) and many others.
MPJ 2451
The ball link type V1 (plastic eye with thread M3 for pushrod, brass ball 7 mm outer diameter and thread M3) allows exact connection and completely free movement of the pushrod at all levels. The set contains nuts M3. Available in black and white colour.
Content of package: 6 pcs
MPJ 96042
Scalpel n.3 from stainless steel with replaceable blades.
Package contains 1 handle n.3 and 3 sterile blades n.11.
MPJ 96420
A tool for more convenient sanding of contours with the possibility of adjusting the sanding width. Maximum width of sanding paper 10 mm, minimum length of the sanding part 50 mm, maximum 70 mm.
Available in two variants - economy and standard.
The economic variant includes hex bolts with a cylindrical head M4x12 mm (MPJ 0430 SB), M4 nuts (MPJ 0108 SZ)...
MPJ 96421
Jig for easier sanding of angles. Clamping of the sandpaper done by a shaped groove and with a clamping block (sandpaper is not included in the package).
Option to purchase additional sanding blocks for quick exchange of sanding paper grits.
MPJ 96406
Sanding block for sanding surfaces and angles. Available in several widths and with different angles.
MPJ 2467 B
The ball link type V1 (plastic eye with thread M4 for pushrod, brass ball 7 mm outer diameter and 3 mm inner diameter) allows exact connection and completely free movement of the pushrod at all levels. The set contains socket head screw M3 and lock nuts M3. Available in black and white colour.
Content of package: 6 pcs
MPJ 2830 AL
Set of aluminium collars for usage for example as a depth stop when drilling. The set contains one piece of each collar with hole diameters: 2; 2,5; 3; 3,5; 4; 5; 6; 8 and 10 mm plus suitable hex socket set screws. Hexagon wrench keys (Allen keys) can be bought under numbers MPJ 0900 SB (1,5 mm), 0901 SB (2 mm), 0902 SB (2,5 mm) or as a set under number...
All products